Shower Filter / Purifier
The #1 shower filter recommended by beauty professionals in Australia.
Protect your skin and hair from hard water damage, it starts with the water you're using. If you are suffering from dry, frizzy, brittle hair, you may even be experience hair loss, it could be hard water! Hard Water can also speed up the aging process and make your skin feel all dehydrated, itchy and tight afterward. It might even make eczema, psoriasis or hives worse. Hard water can mess with your health, making asthma or breathing problems worse and irritating your eyes. So yeah, hard water? Not the best!
But we have the solution!
This shower filter will improves your beauty routine by eliminating hidden nasties from your shower so that you have the purest start to your self-care!
The filtered Beauty Shower Purifier™ reduces more than 95% of water irritants including chlorine, fluoride, magnesium, aluminium, calcium, pesticides, copper, mercury, lead and more!
They also have multi-stage filtration. Not only do they filter out the nasties, but they also infuse the water with beneficial vitamins and minerals such as Zeolite, Vitamin C, and tourmaline.
2 MINUTE INSTALLATION: no Plumber or Tools Needed
Filtered Beauty's™ ultimate shower fitting guide made easy for you in quick steps to cleaner water!
Together, KDF 55, Calcium Sulfite, Activated Carbon, and High Chlorine Balls ensure MAXIMUM filtration with over 95% chlorine removal as well as reducing heavy metals, chemicals, pesticides, and other contaminants from your water.
Includes: Shower Purifier includes 1 x Filtered Beauty casing, 1 x filter cartridge and 1 x tape
HOW TO INSTALL:
Step 1: Flush your Filtered Beauty Shower Purifier
Hold your Filtered Beauty™ Shower Purifier under a tap and turn the water on to flush out the extra carbon particles. This may turn your water black/grey in the beginning, but don’t worry, keep flushing until the water runs clear. Turn it over and follow the same directions for both sides.
Step 2: Remove your Existing Shower Head
Remove the existing shower head from the arm, by turning it counter clockwise. This is usually done by hand; however, you may need a wrench if your shower head is on too tight. Peel away any old tape and clean the threaded pipe.
Step 3: Apply Filtered Beauty Tape
Apply the included tape tightly around your Filtered Beauty™ Shower Purifier thread and the shower arm (approximately 3-5 times).
Step 4: Time to Install Your Filtered Beauty Shower Purifier
Install your Filtered Beauty™ Shower Purifier onto the shower arm by turning it clockwise (hand tight), then install your shower head, also turning it clockwise (hand tight). If additional tightening is required, use a soft cloth to protect the Filtered Beauty™ Shower Purifier, and tighten with a wrench.
Handy hint when you're installing, remember, "righty tighty" and "lefty loosey"! Always turn clockwise unless stated otherwise.
Enjoy your purest shower yet...
*Tools Optional: Wrench (not necessary)
JOIN FOR FREE
The Boss Curl Club
Enjoy free e-learning, go-lives, Q&A's, curl workshops, product reviews and more! It's the best way to learn how to use Boss Curl Co products and also learn about your own curls.
